simpleware

Tue, Feb 27, 2018 2:00 PM - 3:00 PM GMT

Join this webinar to learn how to build patient-specific models in Simpleware for the interdisciplinary area of medical science, simulation and product development.

Learn more and register today.

Learn about Simpleware for 3D image to model solutions at the 8th Conference on Industrial Computed Tomography, held at the University of Applied Sciences Upper Austria this February.

Meet the Simpleware team at this event to explore the software's use for materials characterisation and industrial analysis.

Read more about this event here:http://bit.ly/2DBXWKy

This one-day course is intended for experienced Simpleware users wanting advanced training on a specific topic or application. It will allow you to develop workflows based on your areas of research and future projects.

Learn more and registerto attend this event.

This workshop is aimed at those interested in obtaining high fidelity models from 3D image data. You will experience first-hand how quick and easy it is to visualize and process 3D image data (CT, MRI, FIB-SEM...), and generate models for CAD design, FE/CFD simulation and 3D printing. If you are working in areas such as Materials Science, Industrial Reverse Engineering and Life Sciences, then this workshop is for you.

This one-day intensive training course intends to give new and existing users sufficient knowledge of the basic functionality of Simpleware software for converting 3D image data (MRI, CT...) into mdoels for CAD, CAE, and 3D Prrinting applications. It will allow you to develop workflows based your areas of research and future projects.

Learn moreabout this training day.

Tibial post failure has been reported in several retrieval studies for knee surgeries using posterior-stabilized (PS) prostheses. Fractures of the tibial post are considered to be caused by high stress-induced destruction (bending and tensile forces). The design of polyethylene inserts requires a certain level of plastic deformation to take place without the risk of deformation. The design of the tibial post varies markedly among manufacturers.

Date / Time: Tuesday, September 26, 2017 / 1:30 PM to 5:30 PM CDT

Venue: Texas Medical Center Innovation Institute, John P. McGovern Campus, Houston, TX

Organisers: Virtual Integrated Analytics Solutions (VIAS) - Ali Can Solak (asolak@viascorp.com; (832) 766-9086)

VIAS cordially invites you to participate in a half day Advanced Biomedical Simulation Seminar at the Texas Medical Center in Houston.

Who should attend

Date: Thursday, September 7, 2017

Time: 9:00 am PDT (West Coast) / 12:00 EDT pm (East Coast) / 5:00 pm BST (UK) / 6:00 pm CEST (Europe)

Presented by: Matthew Flail (Footprint 3D, USA)

September 4 - 5, 2017 - University of Warwick, Coventry, UK

When: Tuesday, September 19, 2017

Where: Synopsys Reading Training Centre, 100 Brook Drive, Green Park, Reading, RG2 6UJ, United Kingdom

Overview

This one-day intensive training course intends to give new and existing users sufficient knowledge of the basic functionality of Simpleware software. It will allow you to develop workflows based your areas of research and future projects.

Date: Thursday, July 13, 2017

Time: 8:00 am PDT (West Coast) / 11:00 pm EDT (East Coast) / 4:00 pm BST (UK) / 5:00 pm CEST (Europe)

一个ttend this webinar to discover how Simpleware software and/or services can be leveraged to generate high-quality human body models from sources like MRI and CT image data. In partnership with SIMULIA.

Topics covered include:

We're running free workshops on using Simpleware software for 3D image visualisation, analysis and model generation from June 6-9 in Lancashire, UK.

Join us for these introductory sessions to learn the basics of the software and how to apply it to applications in the Life Sciences, Materials Science, Industrial Reverse Engineering and Non-Destructive Engineering, and many more.

Dates

June 6 -Lancaster

We have free workshops in Eindhoven (May 22nd), Delft (May 23rd), and Amsterdam (May 24th) - learn more and sign up for these introductions to using Simpleware software for generating high-quality models from 3D image data.

Register: Wednesday, May 24th, 2017-9:00 am PDT (West Coast) / 12:00 pm EDT (East Coast) / 5:00 pm BST (UK) / 6:00 pm CEST (Europe)

We're running fundamental and advanced training courses on Simpleware software on May 9th and 10th at the Synopsys Reading Training Centre.

Sign up for thefundamentalscourse to cover: