iMechanica - Comments for "Abaqus CAE"

Making straight edge along cylinder

KennyNg — Sat, 23 Jan 2010 18:56:42 +0000

<一个id = "评论- 13347 " > < / > < p > < em >回复< href="//m.limpotrade.com/comment/9756#comment-9756">Go to assembly or to part

Hi Mikael,

I went to the assebly and couldn't find any feature to draw a line along the cylinder. What is the special feature that can do that? Thanks.

Kenny

create a composite

trillyaction — Tue, 19 Jan 2010 16:33:37 +0000

In reply to Go to assembly or to part

Hi,

i'm trying toi create a simple composite material.

I draw 2 cubes and I merged them.I have the same charateristic for both of them,the data of the fiber and the matrix and the orientation.I tried to create the composite material going on

composite layer manager--->create--->conventional shell (2 layers)

I filled all the field but i can't fill the region one...i donno why...may be thats not the right way to built it up a composite?

trillyaction@gmail.com

Thanks a lot

purchase

ndaphalapurkar — Tue, 07 Apr 2009 13:55:35 +0000

In reply to Request for Abaqus software

http://www.simulia.com/products/abaqus_fea.html

F.T. Romeo: You may purchase your own license and ABAQUS product from above link of Simulia's website or request a trial version. I doubt whether others will offer you to use their own softwares.

Request for Abaqus software

ftr_romeo — Tue, 07 Apr 2009 01:26:41 +0000

<一个id = "评论- 10407 " > < / > < p > < em >回复< href="//m.limpotrade.com/node/4747">Abaqus CAE

Hi, i posted a request for the abaqus software some times ago. Unfortunately no-one has responded to my request. Please am still in need of the software and am gratefull to imechanica for this medium of communication.

thanks

Fono Tamo Romeo,
Tel:+2348067367790
E-Mail:fonotamoromeo@hotmail.com
Dept of Mechanical Engineering,
Obafemi Awolowo University,
Ile-Ife, Nigeria.

Thanks Mikael for the tip.

hadi — Fri, 06 Mar 2009 13:35:01 +0000

In reply to Go to assembly or to part

Thanks Mikael for the tip.

Go to assembly or to part

Mikael Öhman — Thu, 05 Feb 2009 16:42:04 +0000

In reply to Abaqus CAE

Go to assembly or to part and make a straight edge along the cylinder (you should be able to select a node on each circle to create this line). Now you can give this edge a coarser or finer seed, although the elements in the mesh will have a rather bad form if you make the difference in the mesh to large.

Seeding edges differently is also limited by the mesh control, but in this case it should work even for structured meshes.